



ARE Toyota Tundra Camper Top | Premium Aluminum & Fiberglass Shells
Our CX-Series brings full-height interior space and premium fiberglass construction to the Toyota Tundra platform. Built specifically for second- and third-generation Tundra beds, this camper top delivers secure weatherproof storage with a smooth painted finish that matches your truck's factory color. We engineer every shell with integrated roof racks, rear sliding windows, and LED dome lighting for versatile hauling and weekend adventures.
The CX-Series sits flush with your Tundra's cab line and includes automotive-grade weather stripping at every seam. We install stainless steel rotary latches at the rear door, plus keyed side access doors on both flanks for quick gear retrieval without dropping the tailgate.
Construction & security highlights

Materials & Construction for Toyota Tundra Platforms
We manufacture Tundra camper shells in two core materials: fiberglass-reinforced composite and powder-coated aluminum. Our fiberglass shells use a multi-layer lamination process with gel-coat finish that accepts automotive paint, so we can match your Tundra’s factory color code down to the metallic flake. The composite material dampens road noise better than metal and resists denting when you load roof cargo or brush against low branches on trail access roads.
Aluminum shells trade acoustic damping for weight savings and lifetime corrosion resistance. We extrude every frame rail and rivet the panels with aircraft-grade fasteners, then apply electrostatically bonded powder coat in black, white, or silver. The finished MX-Series shell weighs roughly 95 pounds for a 6.5 ft bed versus 160 pounds for the equivalent fiberglass CX-Series, which preserves more of your Tundra’s payload capacity when you’re hauling equipment or towing a trailer.

Bed Fitment & Installation for Second- and Third-Generation Tundra
Every ARE Toyota Tundra camper top ships with bed-length-specific clamps and rubber pads that grip the top rail of your bed without drilling holes. We mold each shell to follow the exact cab contour of 2007–2013 and 2014–present Tundra models, and we produce variants for the 5.5 ft short bed, 6.5 ft standard bed, and 8.1 ft long bed. The front bulkhead sits within one-eighth inch of the rear cab glass, leaving only enough clearance for the factory third brake light and cab weather seal.
Installation Process
Our authorized dealers complete a typical camper shell installation in 60 to 90 minutes. The clamp system threads onto studs welded inside the shell’s lower flange, and we position rubber isolation pads at eight points along the bed rail to prevent paint chipping and distribute load. We torque each clamp to 15 ft-lb and verify that the rear door aligns with the tailgate in both open and closed positions. After installation, you’ll receive a care guide covering paint maintenance, weather seal inspection intervals, and latch lubrication.
Lighting, Ventilation & Accessory Integration
We pre-wire every Tundra camper top with dual LED dome lights controlled by a three-position rocker switch mounted inside the rear door frame. The lighting harness taps your truck’s cargo lamp circuit, so the interior LEDs activate when you unlock the doors or open the tailgate. Our fiberglass CX-Series shells include a sliding rear window with removable screen, and both side windows open for cross-ventilation during warm-weather camping or when you’re parked at the job site.
The roof surface accommodates aftermarket roof racks, kayak cradles, and solar panel mounts. We install threaded inserts at 16-inch intervals along both roof rails, and the aluminum crossbar tracks accept industry-standard T-bolts. The integrated roof rack on the CX-Series carries a 200 lb distributed load rating, which covers two kayaks, a rooftop tent, or lumber extending beyond the bed length. We also offer factory-installed roof vents for additional airflow if you plan to use the shell as a sleeping platform on weekend trips.



Additional Camper Shells for Full-Size & Mid-Size Pickups
Rated 4.8 by verified buyers


Common Questions About Tundra Camper Shells
Yes, we engineer the CX-Series and MX-Series shells for both steel and composite bed construction on 2022 and newer Tundra models. The clamp system grips the upper bed rail regardless of bed material, and we include additional rubber isolation pads for composite beds to distribute the load across a wider surface area and prevent stress cracking. Our dealers verify bed length and generation during the ordering process to ensure correct fitment.
We offer factory paint matching for any Toyota color code, including two-tone combinations like the TRD Pro trim. For two-tone requests, we paint the shell body in your primary color and can add accent stripes or lower panels in the secondary color at our paint facility. Special-edition finishes such as Army Green or Solar Octane require an additional two weeks for custom mixing, and you'll need to provide your truck's paint code from the door jamb sticker when you order.
The CX-Series full-height shell provides approximately 20 inches of clear interior space above the bed floor at the tallest point near the cab. This measurement accommodates most folding camping cots, gear bins, or a low-profile sleeping platform. The MX-Series aluminum shell offers identical interior clearance. If you plan to build a custom sleeping setup, we recommend measuring with your tailgate closed, since the usable length extends from the bulkhead to the rear door frame.
Our Tundra camper shells include a removable front panel option for customers who tow fifth-wheel trailers. We install a hinged or fully removable bulkhead section that lifts out in under five minutes, creating clearance for the trailer kingpin. The standard shell does not accommodate gooseneck hitches without this modification, so specify fifth-wheel compatibility when you place your order if you plan to tow.
Every ARE Tundra camper top ships with pre-installed threaded inserts along both roof rails, spaced at 16-inch intervals to match industry-standard crossbar spacing. The CX-Series includes an integrated aluminum roof rack rated for 200 pounds of distributed load. The MX-Series has mounting points for aftermarket crossbars, which you can source from Thule, Yakima, or Rhino Rack. We also drill mounting holes for specific rack systems on request at our manufacturing facility.
Your camper shell ships with a complete clamp kit containing eight C-clamps, rubber isolation pads, stainless steel hardware, and an installation manual. We also include the wiring harness for LED dome lights, a set of two keys for the side doors and rear latch, touch-up paint in your shell's color, and a tube of silicone lubricant for the weather seals. Most dealers include installation labor in the purchase price, but confirm this when you request a quote.
Inspect the bulb seal around the rear door and side doors every three months, looking for compression set, cracking, or gaps. Clean the seal surfaces with mild soap and water, then apply a thin coat of silicone spray lubricant to keep the rubber pliable. We recommend replacing the bulb seal every four to five years in harsh climates, and replacement seals are available through any ARE dealer. Avoid slamming the doors, since this compresses the seal unevenly and can cause premature wear at the latch points.


