






Chevy Silverado Camper Shell – Premium Truck Cap by A.R.E.
Our CX Series camper shell transforms your Chevy Silverado into a secure, weatherproof cargo hauler and adventure platform. Engineered specifically for the Silverado bed profile, this truck cap delivers a precise factory-style fit with integrated third brake light, heavy-duty rotary latches, and our signature composite construction that resists dents and corrosion.
Whether you’re hauling tools to the job site, protecting gear on weekend trips, or converting your truck bed into a sleeping platform, the CX provides full-height interior clearance and rugged protection. We build each Silverado camper shell with automotive-grade materials and paint-matched finish options to complement your truck’s appearance while standing up to years of daily use.
Built for your Silverado

Materials & Construction
We manufacture the CX Series using RTM (Resin Transfer Molding) composite fiberglass – the same process aerospace and marine industries rely on for strength-to-weight performance. This construction method bonds the outer gel coat, structural fiberglass layers, and inner surface in a single curing cycle, eliminating the weak points and delamination risks common in hand-laid shells.
The result is a Chevy Silverado camper shell that weighs 30-40% less than comparable aluminum models while maintaining superior impact resistance. Composite construction won’t dent from hail or shopping carts, won’t corrode from road salt, and holds paint better than metal. The RTM process also allows us to mold in structural ribbing and mounting points, so the cap installs with factory precision and eliminates the rattles and flexing you’ll find in budget truck toppers.

Silverado Bed Compatibility & Installation
The CX Series camper shell is engineered around the exact bed rail profile of the Chevy Silverado 1500, 2500HD, and 3500HD platforms. We produce bed-length-specific versions for the 5’8″ short box, 6’6″ standard box, and 8′ long box – each with mounting clamp spacing that aligns with your truck’s bed stake pockets and rail geometry.
Installation uses our hidden C-channel clamp system that fastens under the bed rail cap, leaving no visible hardware on top of your paint. The clamps distribute load evenly across eight points (ten on long bed models), preventing the stress cracks that occur when caps are secured at only four corners. Third brake light wiring connects via a quick-disconnect plug that integrates with your Silverado’s existing tailgate harness – no splicing or aftermarket relays required.
Interior Space & Accessory Options
The CX Series provides full standing height at the bulkhead (typically 19-21 inches depending on bed length), tapering to 14-16 inches at the tailgate to match the Silverado’s bed taper. This interior volume accommodates standard toolboxes, coolers, and camping gear without requiring you to remove the cap for taller loads.
Our carpet headliner comes standard and includes pre-wired dome light provisions – just add an LED puck light and connect to the existing pigtail. Sliding side windows feature aluminum frames with locking latches and removable screens, letting you ventilate the bed space during summer camping trips or when transporting pets. The tinted glass blocks UV and prying eyes while still allowing enough light for visibility when loading.



Browse Camper Shells for Other Trucks
Rated 4.8 by verified buyers






Silverado Camper Shell Questions
Yes, the CX Series is designed to accommodate spray-in bedliners. The mounting clamps adjust to compensate for the additional thickness of spray liner on the bed rails. During installation, you’ll tighten the clamps until the cap sits flush against the bed rail weatherstripping.
If you have an extremely thick liner (over 1/4 inch buildup on the rails), let us know when ordering so we can include extended clamp bolts. Most popular spray liners like Line-X and Rhino Liner install without any fitment issues.
The CX includes a quick-disconnect wiring harness that plugs directly into your Silverado’s existing tailgate harness connector. You’ll find the connector near the passenger-side tailgate hinge – just unplug your tailgate’s brake light connector and plug in the Y-harness adapter we provide.
The adapter splits the signal so both your tailgate light and the cap’s roof-mounted LED light illuminate when you brake. No wire splicing, no electrical tape, no aftermarket relays. Installation takes about two minutes and reverses just as easily if you ever remove the cap.
Yes, the CX Series is designed to work with your Silverado’s tailgate in both the closed and open positions. When the tailgate is down, the cap’s rear door provides full access to the bed. You can open the tailgate independently for loading longer items that need to extend past the truck bed.
Many Silverado owners leave the tailgate up most of the time and use the cap’s rear door for daily access, then drop the tailgate when hauling lumber or ladders. The cap door seals against the bulkhead when closed, regardless of tailgate position.
Composite shells like our CX Series use molded fiberglass construction that’s lighter, dent-resistant, and won’t corrode. Aluminum caps are typically heavier, prone to denting from hail and impacts, and can develop corrosion at seams and fastener holes over time.
Composite construction also holds paint better and provides better insulation. The fiberglass structure dampens road noise and doesn’t conduct heat as readily as metal. The main trade-off is initial cost – composite shells typically cost 15-20% more than comparable aluminum models, but the durability and lower maintenance offset that premium over the cap’s lifespan.
The CX roof structure is engineered to support 200 lbs of distributed dynamic load when using our optional roof rack system. This capacity handles two kayaks, a rooftop cargo box, or camping gear without stressing the shell structure.
The weight rating assumes even distribution across crossbars and proper installation of the rack system. We don’t recommend standing or walking on the cap roof without load-spreading support, as point loads can stress the gel coat. The molded-in reinforcement ribs provide the strength, but the load needs to be spread through a rack or load bars.
Yes, the CX Series is available in several window configurations. The standard model includes sliding side windows with screens. We also offer a solid-side version with no windows for maximum security and a ranch-style version with fixed glass side windows and front slider.
All configurations include the rear door with center latch. You can also upgrade to privacy-tint glass (darker than standard tint) or add removable window screens if you order the fixed-glass option. Window choices are selected at the time of order – we build each cap to your specification.
Textured black CX shells typically ship within 2-3 weeks from order. Paint-matched caps require an additional 1-2 weeks for color mixing, application, and curing. Total lead time for a custom-painted Silverado camper shell is usually 3-5 weeks depending on our production schedule.
We batch paint orders by color family to ensure consistency, so if you’re ordering a popular Silverado color like Summit White or Black, your cap may move through the paint booth faster than a unique metallic or pearl shade. Your dealer can provide a more specific timeline based on current production.



