A.R.E. Replacement Parts product image
A.R.E. Replacement Parts product image
A.R.E. Replacement Parts product image

A.R.E. Replacement Parts | Official Parts & Accessories

★★★★★4.8· thousands of reviews

Genuine A.R.E. replacement parts keep your truck cap, tonneau cover, and accessory systems performing like new. We manufacture every component to the same factory specifications as the original equipment, ensuring precise fit and long-term reliability. Whether you need a replacement lock cylinder, gas strut, weather seal, clamp assembly, or window hardware, our parts catalog covers every model and configuration we've built over the past four decades.

Every replacement component ships directly from our manufacturing facilities, backed by the same quality standards that built our reputation. We engineer our parts for straightforward installation — most components require only basic hand tools and can be fitted in your driveway.

Find Your PartExplore the Collection
01
Factory-direct components engineered to original equipment specifications
02
Precision fit guaranteed for all current and legacy A.R.E. models
03
Weather seals designed to maintain watertight performance
04
Gas struts rated for thousands of lifting cycles
At a glance

What's Included with Every Part

Factory-direct components engineered to original
Precision fit guaranteed for all current and leg
Weather seals designed to maintain watertight pe
Gas struts rated for thousands of lifting cycles
Lock assemblies keyed to match your existing sys
Hardware kits include all mounting fasteners and
Components & Coverage
Product details

Components & Coverage

Our replacement parts catalog organizes components by system and function. Locking hardware includes cylinders, latches, handles, and striker plates for both single-point and three-point lock configurations. Lifting support covers gas struts in multiple force ratings, hinge assemblies, and torsion bar hardware. Weather sealing components include bulb seals, corner moldings, and cab-edge gaskets manufactured from EPDM rubber compounds that resist UV degradation and temperature extremes.

Glass components and related hardware support both sliding and fixed window configurations. The tempered glass panels we manufacture for side windows, front sliders, and rear doors carry the same DOT certification as original equipment, with precision-cut dimensions that eliminate wind noise and water intrusion. Electrical accessories include interior LED lighting kits, dome light assemblies, and wiring harnesses for third brake lights and work lamps.

Model Compatibility & Identification
Sizing & fit

Model Compatibility & Identification

Every A.R.E. truck cap carries a model designation stamped on the identification plate, typically mounted inside the rear door frame or along the driver-side interior rail. This plate includes your cap’s model name, production date, and configuration code. When ordering replacement parts, reference this information to ensure component compatibility — critical for items like lock cylinders that must match your existing key, or gas struts rated for your specific cap’s weight and door size.

Older models dating back to the 1980s and 1990s remain supported through our legacy parts program. We maintain tooling and material specifications for discontinued lines, manufacturing components on demand for models that may no longer be in active production. If you own a classic DCU, LS2, or CX-series cap, our parts team can cross-reference your identification plate to current inventory or schedule a production run for specialized components.

Styling

Installation & Maintenance

Most A.R.E. replacement parts install with standard hand tools — socket sets, screwdrivers, and hex keys handle the majority of hardware swaps. Gas struts require two people for safe removal and installation, with the door fully supported during the changeover. Lock cylinders typically remove via a retaining clip or set screw accessible from inside the cap; new cylinders drop into the same mounting hole and secure with the original hardware.

Weather seal replacement follows a clean-and-install sequence. Remove old seals completely, clean mounting channels with isopropyl alcohol to eliminate adhesive residue and road grime, then press new seals into place starting at one corner and working methodically around the perimeter. For bulb seals with adhesive backing, allow 24 hours of cure time before subjecting the seal to full door-closing pressure. This ensures the adhesive bonds completely to both the cap frame and the seal’s mounting surface.

Installation & Maintenance
Installation & Maintenance
Installation & Maintenance

Complete the look

Complete Your Truck Cap System


Customer reviews

Rated 4.8 by verified buyers

4.8
★★★★★
Based on verified reviews
Read on Amazon →
Customer photo
“
Perfect fit for my 15-year-old cap
I needed new gas struts for a 2008 CX-series cap. A.R.E. still had the exact part in stock, and installation took about 20 minutes. The door holds open perfectly now, just like when the cap was new.
M
Mike T.
Verified buyer
★★★★★
“
Weather seals fixed my leak issue
Water was coming in around the rear door after years of sun exposure had dried out the original seals. Replaced them with genuine A.R.E. seals and the truck bed is bone dry again, even through heavy rain.
J
Jennifer R.
Verified buyer
★★★★★
“
Lock cylinder keyed to match
Lost one of my keys and decided to replace the lock cylinder. A.R.E. sent a new cylinder that I could have rekeyed locally to match my remaining key. Installation was straightforward with the included instructions.
C
Carlos M.
Verified buyer
★★★★★
“
Fast shipping on specialty hardware
Needed a replacement hinge for an older model. Called customer service, they identified the part from my cap's serial number, and it arrived in three days. The quality is identical to the original.
D
David P.
Verified buyer
★★★★★
“
LED light kit transformed the interior
The new LED interior light kit is way brighter than the old incandescent bulb. Wiring harness plugged right into my existing setup, and the magnetic switch mount is convenient.
A
Amanda K.
Verified buyer
★★★★★
“
Technical support was incredibly helpful
Wasn't sure which gas strut rating I needed for my oversized commercial cap. A.R.E.'s tech team looked up my model and recommended the heavy-duty struts. They work perfectly and should last another decade.
B
Brian L.
Verified buyer
★★★★★

Good to know

Common Questions About A.R.E. Replacement Parts

Locate the identification plate inside your cap, usually mounted on the rear door frame or along the interior side rail. This plate lists your model name, production date, and configuration code. When ordering parts, provide this information to ensure component compatibility. For older or discontinued models, our parts team can cross-reference your plate data to current inventory or arrange custom production runs for specialized components.

Yes, we support legacy models through our heritage parts program, maintaining tooling and material specifications for caps dating back to the 1980s. While some high-turnover items remain in continuous stock, specialized components for discontinued lines may require 3-5 business days for manufacturing and quality verification. Contact our parts department with your identification plate details for availability confirmation on vintage models.

Most replacement components install with standard hand tools and basic mechanical skills. Gas struts, weather seals, lock cylinders, and simple hardware typically require only a socket set and screwdrivers. We include detailed instructions with every part shipment. For jobs requiring precise alignment — such as hinge adjustment or multi-point lock calibration — consider visiting an authorized A.R.E. dealer with professional installation tools and service bay access.

Replacement parts carry a 12-month warranty against manufacturing defects when purchased directly from A.R.E. or through authorized dealers. Coverage includes materials and workmanship but excludes normal wear items like rubber seals subjected to extended UV exposure. We evaluate warranty claims individually and often extend coverage when inspection reveals premature failure unrelated to typical operating conditions.

In-stock components ship from our distribution facilities within one business day of order confirmation. Transit time depends on your location and selected shipping method, typically ranging from 2-5 business days for standard ground service. High-demand items like gas struts, lock hardware, and weather seals maintain deep inventory for immediate shipment. Specialized or custom-order components may require additional production time before leaving the warehouse.

Yes, our weather seal catalog covers both recreational and commercial truck cap lines. We manufacture seals from EPDM rubber compounds engineered to withstand industrial use, temperature extremes, and heavy door cycling. When ordering seals for commercial models, verify your cap's specific configuration code to ensure you receive the correct cross-section profile and length for your application. Seals designed for fleet service include enhanced UV and ozone resistance for extended service life.

Authorized A.R.E. dealers stock common replacement parts and can special-order any component from our catalog. This option provides immediate pickup for high-turnover items and access to professional installation services when needed. Dealers use the same parts pricing and warranty structure as our direct sales channel. Use our dealer locator or contact customer service to find an authorized service center in your area.

The collection
Explore Our Full Truck Cap Accessories Lineup
From storage organizers to lighting systems and security upgrades
Browse All AccessoriesBrowse All