






A.R.E. Topper Replacement Glass | Official Parts & Service
Our factory-authorized A.R.E. topper replacement glass restores full weathertight protection to your truck cap. Every pane is manufactured to the exact OEM curvature and thickness, so side glass, rear glass, and sliding windows drop into place with the same precision as the day your topper left our facility. We stock tempered safety glass for every current and legacy A.R.E. model, from the DCU Sport Lid to the Z Series and CX Revo. When a crack compromises your cargo security or visibility, genuine replacement glass ensures perfect gasket compression, zero leaks, and unmatched optical clarity.
Whether you need a single sliding window pane or a full rear glass panel, we ship direct from our parts warehouse with the hardware and gasket kits required for a professional-grade install. Our glass meets the same ANSI Z26.1 safety standard we apply to every new topper, so you're not compromising on strength or UV resistance when you replace a damaged panel.
Glass specifications & fit details

Glass Types & Model Compatibility
A.R.E. replacement glass is cataloged by topper model and panel position, so ordering the correct piece starts with knowing your cap’s series designation. Side glass panels—driver and passenger—are available in stationary and sliding configurations; rear glass is offered as fixed, flip-up, or sliding depending on your original build. The DCU and Z Series use identical rear-door glass profiles, while the CX Revo employs a slightly taller pane to accommodate its integrated roof rack. Every listing specifies frame color and gasket type to match your existing topper trim.
Slider assemblies include the glass pane, aluminum track, roller hardware, and locking latch. If you’re replacing just the glass itself—because the frame and rollers remain intact—order the pane-only SKU to avoid duplicate parts. Legacy models such as the LS2 and TW Series remain supported through our warehouse inventory, though lead times may extend to 10–14 business days for less common configurations.

Installation & Gasket Care
Installing A.R.E. topper replacement glass requires removal of the existing gasket, cleaning the frame channel with isopropyl alcohol, and setting the new pane into fresh butyl or EPDM rubber. We include a bead of sealant tape with every rear-glass order to ensure watertight compression along the lower edge. Torque each retaining clip to 25–30 inch-pounds using a socket wrench; overtightening can crack tempered glass at the mounting points.
Slider Windows
Slider glass drops into the upper and lower tracks from the side; once aligned, the latch assembly threads into the factory holes along the trailing edge. Apply silicone spray to the rollers and track grooves before cycling the window open and closed. If the pane binds or skips, loosen the track screws by one-quarter turn and test again. The same sealed-bearing rollers found in our production toppers ship with every slider kit, so expect smooth, quiet operation for years after installation. Many truck owners upgrading other elements of their bed setup—whether adding LEER window replacement panels to a companion cap or installing bed dividers—find that matching gasket profiles across brands simplifies future maintenance.
Warranty & Safety Standards
Every piece of A.R.E. topper replacement glass carries our one-year limited warranty against manufacturer defects in materials and workmanship. The warranty covers delamination, spontaneous breakage, and gasket separation under normal use. Damage caused by improper installation, road debris, or collision is excluded. Tempered glass meets ANSI Z26.1 requirements for automotive glazing, which means it shatters into small, blunt cubes rather than sharp shards when fractured.
UV-resistant tint—available on select rear and side panels—blocks 99 percent of ultraviolet radiation to protect cargo, upholstery, and electronics stored under the cap. The same tint formulation we apply at the factory is laminated into replacement panes, so color consistency remains perfect even after a single-panel swap. If you require DOT-stamped certification for commercial fleet compliance, request the stamped-glass option at checkout; most state inspection programs accept our standard tempered panes without additional marking.



More A.R.E. Topper Parts & Upgrades
Rated 4.8 by verified buyers






Common Questions About A.R.E. Replacement Glass
Locate your topper's model badge on the front header rail or driver-side frame; it will read DCU, Z Series, CX Revo, or a similar designation. Measure the existing glass panel if the badge is missing—our parts team can match dimensions to the factory SKU. When ordering, specify whether you need side, rear, or slider glass and confirm the frame color to ensure gasket compatibility.
Yes. Every glass order includes fresh EPDM or butyl rubber gaskets, retaining clips, and stainless mounting hardware. Slider kits also include the aluminum track, rollers, and locking latch. If you are replacing only the pane and reusing the existing frame assembly, select the pane-only SKU at checkout to avoid duplicate parts.
Most truck owners with basic hand tools can complete the installation in 30–45 minutes. Remove the old gasket, clean the frame channel with isopropyl alcohol, set the new pane into the fresh gasket, and torque the retaining clips to 25–30 inch-pounds. Slider assemblies require alignment of the upper and lower tracks before threading the latch hardware into place. If you are uncomfortable working with glass, a mobile glass service or truck accessory shop can perform the swap.
Yes. We apply the same UV-resistant tint formulation used in production toppers, so color and light transmission remain consistent across all panels. If you originally ordered a cap with upgraded privacy tint, specify that option when ordering replacement glass to maintain uniform appearance. Standard tint blocks 99 percent of UV radiation to protect cargo from sun damage.
Every pane carries a one-year limited warranty against manufacturer defects in materials and workmanship, including delamination, spontaneous breakage, and gasket separation. The warranty does not cover damage from improper installation, road debris, or collision. Tempered glass meets ANSI Z26.1 automotive glazing standards and shatters into small blunt cubes when fractured, minimizing injury risk.
In-stock glass ships within two business days via ground freight. Custom tint upgrades or non-standard panel sizes may require fabrication at our manufacturing facility, extending lead time to 7–10 business days. Legacy model glass for older topper series can take 10–14 business days depending on warehouse availability. We package each pane in rigid cardboard with corner guards and foam edge protectors to prevent breakage during transit.
Glass dimensions and mounting points remain identical to factory specifications, so aftermarket roof racks, louvers, and bed lighting do not interfere with fit. If you drilled custom holes in the frame for accessories, ensure those modifications do not overlap the gasket channel or retaining-clip positions. Contact our parts team if you need confirmation that a specific modification will not affect glass installation.



