






LEER Locker Bed Storage System | Secure Truck Bed Organization
We designed the LEER Locker to solve one of the biggest headaches truck owners face — keeping tools, gear, and valuables secure without sacrificing bed space. This modular storage system mounts directly to your truck bed rails, delivering lockable compartments that keep everything organized and protected from theft and weather.
The aluminum construction resists rust and handles daily job-site abuse. Each compartment seals with weatherproof gaskets, so rain and dust stay out while your gear stays dry. Installation is straightforward — the system clamps onto most factory bed rails without drilling, and you can configure compartments to fit your exact workflow.
Whether you're hauling contractor tools, outdoor equipment, or emergency supplies, the LEER Locker gives you instant access to what you need while keeping it locked down when you're away from the truck.
What makes the LEER Locker stand out

Materials & Build Quality
We built the LEER Locker around marine-grade aluminum extrusions that won’t corrode even in coastal or snow-belt climates. Every welded seam is ground smooth and powder-coated to prevent oxidation. The drawer slides use ball-bearing mechanisms rated for 75 pounds of tool weight per drawer, and the gas struts on lift-lid compartments hold steady even when fully loaded.
The locking cylinders are stainless steel and key-matched to your existing LEER cap — one key operates both the cap and every locker compartment. Weatherstripping around each door and drawer uses EPDM rubber, the same material trusted in automotive door seals. For customers who routinely expose gear to extreme conditions, the optional heavy-duty hinge kit replaces standard piano hinges with reinforced stainless steel barrel hinges.

Installation & Compatibility
The LEER Locker system mounts to factory bed rails using integrated C-clamps — no drilling required. Most single-cab and crew-cab beds accommodate two drawer units and one lift-lid unit along each rail. Installation takes roughly 45 minutes with basic hand tools; the kit includes a torque wrench adapter to ensure clamps are tight without crushing the rail.
Our engineering team designed the mounting brackets to clear LEER 100R, 122, and DCC caps without interference. If you’re running a tonneau cover instead of a cap, the locker units sit low enough that soft roll-up and folding covers can still close. Hard tri-fold covers may require repositioning one locker unit closer to the tailgate.
Configuration Options
We offer three core modules — a three-drawer unit, a two-drawer-plus-shelf unit, and a single lift-lid compartment. You can mix these along each bed rail to match how you actually use your truck. Contractors often run drawer units on the driver side for daily tools and a lift-lid unit on the passenger side for longer items like levels and conduit.
Each drawer extends fully on ball-bearing slides, so you can reach items at the back without leaning into the bed. The lift-lid compartments open to 90 degrees and lock in place with gas struts, freeing both hands to load or unload gear. Interior dividers are adjustable — slide them into any slot to create custom compartments for battery packs, drills, or small parts bins.



Complete Your LEER Setup
Rated 4.8 by verified buyers







Common Questions About the LEER Locker System
The locker system works with most 5.5-foot, 6.5-foot, and 8-foot truck beds. Each module is sized to fit between the bed rails, and you can mix configurations to match your bed length. Measure the distance between your bed rails before ordering — standard rails are 50 to 52 inches apart, and our units are designed to clamp onto rails within that range.
If you're running aftermarket bed rails or a specialty bed liner, contact us with your truck year, make, and model so we can confirm fitment.
Soft roll-up and folding tonneau covers will close over the locker units without issue — the units sit low enough that they don't interfere with the cover rails. Hard tri-fold covers may require repositioning one locker closer to the tailgate to avoid blocking the fold mechanism.
If you have a retractable cover, measure the canister height and compare it to the locker unit height (9.5 inches for drawer units, 11 inches for lift-lid units). Most retractable canisters sit higher than the lockers, so clearance is rarely a problem.
Each drawer is rated for 75 pounds of evenly distributed weight. The ball-bearing slides will handle that load without sagging or binding. If you're storing heavy items like batteries or cast-iron tools, distribute the weight across multiple drawers rather than loading one drawer to capacity.
The lift-lid compartments can hold up to 100 pounds, but we recommend keeping weight centered to avoid stressing the gas struts over time.
Yes — if you already own a LEER cap, the locker cylinders are keyed to match your cap's lock. When you order, let us know your cap model and key code, and we'll match the locks so one key operates everything. If you don't have a LEER cap, the locker ships with two keys that operate all compartments on the system.
No — the LEER Locker installs with hand tools in about 45 minutes. The clamp system requires no drilling, and the kit includes all mounting hardware and a step-by-step guide. You'll need a socket wrench and the included torque adapter to tighten the clamps to spec.
If you prefer professional installation, most LEER dealers offer installation services for a flat fee.
Absolutely. The modular design lets you start with one or two units and add more as your needs change. Each unit clamps independently, so you can rearrange or add compartments without removing existing units. Just make sure you have enough bed rail space — measure the rail length and subtract any space taken up by tie-down anchors or stake pockets.
We back the locker system with a three-year limited warranty covering defects in materials and workmanship. The warranty includes the aluminum housing, locks, drawer slides, and gas struts. Normal wear items like weatherstripping and paint finish are covered for the first year.
If a component fails due to a manufacturing defect, we'll ship a replacement part at no charge. The warranty does not cover damage from accidents, improper installation, or modifications.




