



F-150 Truck Cap – Premium Fiberglass & Aluminum Caps for Ford F-150
Our CX Series f150 truck cap is designed specifically for Ford's full-size pickup, featuring smooth aerodynamic lines that mirror the F-150's cab profile. Built from hand-laid fiberglass with automotive-grade gelcoat, this cap delivers both weather protection and modern styling. We color-match every unit to your truck's factory paint code, ensuring seamless integration from bumper to tailgate.
Three side windows with sliding screens provide ventilation during work or camping trips, while the full-height rear door opens wide for loading oversized cargo. The rotary latch system locks at three points along the tailgate seal, keeping your gear secure even on rough terrain. Whether you're hauling tools to the job site or camping gear into the backcountry, the CX Series transforms your truck bed into a locked, weatherproof storage vault.
What makes our F-150 caps different

Materials & Construction Standards
Every ARE cap for the F-150 starts with either hand-laid fiberglass or marine-grade aluminum, depending on which series you choose. Our fiberglass shells use a minimum of six layers of woven mat and resin, creating a structure that’s both lightweight and impact-resistant. We apply automotive gelcoat in your truck’s exact paint code, then finish with two-stage clear coat for UV protection and gloss retention.
Aluminum caps in the MX Series use .063-inch sheet aluminum over a welded tubular frame, the same construction method we’ve refined over four decades of building commercial truck bodies. Corner posts are double-walled and filled with structural foam, distributing roof loads evenly across the bed rails. All hardware—hinges, latches, and mounting clamps—is stainless steel or zinc-plated to prevent corrosion in snow belt conditions.

Sizing & Bed Compatibility
Ford has offered the F-150 in three bed lengths since 2015: the 5.5-foot (67.1″) box on SuperCrew models, the 6.5-foot (78.9″) standard bed, and the 8-foot (97.6″) long bed available on Regular and SuperCab configurations. We manufacture caps for all three lengths, with model-year-specific mounting points that align with Ford’s bed rail profiles.
Our caps install using adjustable clamps that grip the inside edge of your bed rails—no drilling required. The CX, MX, and DCU series all share the same clamp design, which accommodates minor variations in bed width that occur between different F-150 trim levels. If you’ve added an aftermarket bed liner, our clamps adjust outward up to half an inch to maintain proper clamping pressure.
Installation & Mounting Process
We design every F-150 cap for owner installation using basic hand tools. The process takes about 45 minutes with two people and requires only a socket set, a drill with a 1/8″ bit for pilot holes (on some trim levels), and a level. Each cap ships with a detailed instruction sheet specific to your truck’s model year and bed length.
Start by cleaning your bed rails thoroughly—any dirt or bed liner overspray can prevent the mounting clamps from seating properly. Position the cap on the bed, aligning the front edge with the cab. The gap between the cap and cab should be uniform across the width, typically 3/8 to 1/2 inch. Once positioned, insert the clamps into the bed rail channel and hand-tighten them in sequence, working from front to rear on alternating sides.



More Custom Truck Caps for Popular Pickups
Rated 4.8 by verified buyers


Common Questions About F-150 Truck Caps
Yes, our mounting clamps adjust to accommodate spray-in liners up to 1/2 inch thick. The clamps slide outward on their rails to maintain proper grip on the bed rail edge even with liner material present. If you have a drop-in plastic liner, you may need to trim the front edge slightly where the cap sits against the bulkhead, but the cap itself will fit all three bed lengths regardless of liner type.
For best results, clean any overspray or texture from the top surface of your bed rails before installation. This ensures the rubber gasket on the cap base creates a weathertight seal.
No, truck caps and tonneau covers serve the same function—covering and protecting the bed—so they can't be used simultaneously. However, many customers switch between the two seasonally by keeping the mounting hardware for both installed year-round.
Our clamps leave the bed rails undamaged when removed, so you can swap a cap for a low-profile tonneau cover in summer months when you want better fuel economy and easier bed access, then reinstall the cap in fall for weather protection and security.
Weight varies by model and bed length. A CX Series cap for a 5.5-foot bed weighs approximately 180 pounds, while the same model for an 8-foot bed weighs around 240 pounds. MX Series aluminum caps are slightly lighter—160 pounds for a short bed, 210 pounds for a long bed. DCU models fall in between at 175–230 pounds depending on bed length.
All weights include the mounting clamps and wiring harness. You'll want two people for installation regardless of which model you choose, both for safety and to ensure proper alignment during the initial positioning.
Independent testing shows that a properly installed truck cap can actually improve highway fuel economy by 1–2 MPG compared to driving with an open bed. The cap smooths airflow over the bed, reducing the turbulent wake that creates drag behind the cab.
The aerodynamic benefit is most noticeable with our CX and DCU series, which feature sloped rear profiles that mirror the cab angle. The MX Series has a more upright profile for maximum interior height, so the fuel economy gain is smaller but still measurable on highway trips.
Yes, all ARE caps are designed to preserve full functionality of your factory backup camera. The cap sits low enough that it doesn't block the camera's field of view, and the rear glass on CX and DCU models is positioned to stay out of the camera frame.
If you have guidelines enabled on your backup camera display, you may notice the cap edges at the top of the screen, but the parking zone and obstacle detection areas remain completely visible.
We back every F-150 cap with a three-year warranty covering structural defects, manufacturing flaws, and workmanship issues. This includes the fiberglass or aluminum shell, all mounting hardware, hinges, latches, and glass components. Paint finish on color-matched caps carries a lifetime warranty against peeling, cracking, or delamination from the substrate.
The warranty is transferable if you sell your truck, which helps maintain resale value. Normal wear items like weatherstripping and interior carpet are covered for the first year.
Wash your cap whenever you wash your truck, using the same soap and technique. Avoid automatic car washes with harsh brushes—these can scratch the gelcoat or powder coat finish over time. Hand washing with a microfiber mitt and pH-neutral soap keeps the finish looking new.
Twice a year, apply a coat of automotive wax to fiberglass caps to protect the gelcoat from UV damage. Aluminum MX caps benefit from a spray-on sealant designed for painted metal. Lubricate all hinges and latches annually with white lithium grease, and inspect the weatherstripping around the rear door for any tears or compression damage.

