ARE Commercial Truck Cap product image
ARE Commercial Truck Cap product image
ARE Commercial Truck Cap product image
ARE Commercial Truck Cap product image
ARE Commercial Truck Cap product image
ARE Commercial Truck Cap product image
ARE Commercial Truck Cap product image

Commercial Truck Cap by ARE | Heavy-Duty Aluminum Topper

★★★★★4.8· thousands of reviews

Our commercial truck topper is engineered for the demands of fleet service, municipal fleets, and high-mileage work trucks. The all-aluminum frame and skin resist corrosion season after season while keeping curb weight low—critical when you're logging 40,000 miles a year with a full bed. We pair TIG-welded corners with continuous weather seals so dust, rain, and jobsite debris stay outside your cargo. Heavy-duty gas struts lift the side doors and rear hatch smoothly even under load, and every hinge point is reinforced for the kind of daily abuse a delivery route demands.

You choose the door configuration that matches your workflow: full walk-in rear with fold-down steps, dual side sliding windows with screens, or flush rear barn doors. Every cap ships primed for fleet graphics and comes pre-wired for interior LED task lighting. We build this topper in modular sections, so replacement panels arrive overnight when damage happens, keeping your truck on the road and your downtime measured in hours, not days.

Request fleet quoteExplore the Collection
01
TIG-welded aluminum frame and skin—40% lighter than steel, no rust
02
Continuous EPDM bulb seal around all openings for dust and water protection
03
Heavy-duty gas struts rated for 100,000+ cycles on side doors and rear hatch
04
Interior LED wiring harness pre-installed—connects to truck battery in minutes
At a glance

Built for fleet duty

TIG-welded aluminum frame and skin—40% lighter t
Continuous EPDM bulb seal around all openings fo
Heavy-duty gas struts rated for 100,000+ cycles
Interior LED wiring harness pre-installed—connec
Modular panel construction for fast field replac
Available in dual rear barn doors, full walk-in
Aluminum construction & weight savings
Product details

Aluminum construction & weight savings

We spec marine-grade 5052 aluminum for the entire shell—sidewalls, roof, front panel, and door frames. TIG welding at every seam creates a single-piece structure that flexes with the truck bed instead of cracking at bolt points the way riveted caps do. The material itself won’t oxidize or flake, so you skip the annual sand-and-paint cycle that eats up shop time on steel toppers.

The weight difference shows up immediately on your payload calculator. A comparable steel cap for an eight-foot bed typically adds 425 pounds; our aluminum commercial topper sits at 260 pounds installed. That 165-pound delta translates to an extra pallet of material per trip or enough headroom to stay legal when your crew throws their toolboxes in the back. Fleet managers running work truck cap configurations across a dozen vehicles see the fuel savings stack up over a season—aluminum’s lower rolling resistance pays back the upfront cost inside 18 months for most regional delivery routes.

Door & access configurations
Sizing & fit

Door & access configurations

Side door options

We mount heavy-duty sliders on both sides as standard—each window spans 24 inches and locks with a paddle latch you can operate wearing gloves. The sliding panes use tempered safety glass, and every opening gets a removable screen so you can ventilate the bed without inviting mosquitoes or job-site dust. Upgrade to flip-out barn doors on either side if you’re loading wide cargo like plywood sheets or need two-person access for inventory counts.

Rear hatch styles

Choose the full walk-in rear door when you need to step inside the bed without climbing over the tailgate—integrated fold-down steps lock into place and support 300 pounds. Dual barn doors offer the widest clear opening for forklifts or pallet jacks, and both doors swing 180 degrees so they stay flat against the truck sides while you load. The flush canopy rear sits level with the roofline for a lower profile when clearance matters—warehouses, car washes, parking garages.

Styling

Modular design for fast field repair

Every panel—roof, side, door, front bulkhead—bolts into the frame as a discrete module. When a forklift dents the driver-side wall or a low branch tears the rear hatch, you order that single section instead of replacing the entire cap. We keep every module in stock at our regional distribution centers, so most replacements ship same-day and arrive within 48 hours.

Installation takes two people about ninety minutes with basic hand tools. Unbolt the damaged panel, slide the new one into the frame channels, tighten six stainless bolts per seam, and re-bed the weather seal. No welding, no paint booth, no week-long wait at the body shop. For fleets running ten or more trucks, we train your in-house mechanics to handle the swap during routine service, turning what used to be a three-day down event into a lunch-break fix.

Modular design for fast field repair
Modular design for fast field repair
Modular design for fast field repair

Complete the look

Commercial-grade caps for every truck configuration


Customer reviews

Rated 4.8 by verified buyers

4.8
★★★★★
Based on verified reviews
Read on Amazon →
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
“
Two years in and zero rust
We run six of these on our utility trucks in coastal Virginia—salt spray, humidity, the works. The aluminum has held up better than any steel cap we've owned. Panels still look new, and the seals haven't dried out or cracked. Best part is swapping a damaged door panel took our guy an hour instead of the multi-day wait we used to deal with.
M
Mark T.
Verified buyer
★★★★★
“
Payload difference is real
Switching from our old steel toppers freed up enough weight that we can load an extra pallet of tile per trip without exceeding axle limits. Over a month that's four fewer runs, which pays for the cap upgrade in fuel savings alone. The modular repair thing isn't just marketing either—we've already replaced one side panel after a loading-dock mishap, and it was cheaper than repainting a dented steel cap.
L
Linda K.
Verified buyer
★★★★★
“
Interior lights work flawlessly
The pre-wired LED setup was plug-and-play. I connected the harness to the battery, mounted the switch, and had light in the bed in twenty minutes. Motion sensors are a nice touch—no fumbling for switches when your hands are full. After nine months the system hasn't drained the battery once, even when the truck sits for long weekends.
J
Jason R.
Verified buyer
★★★★★
“
Walk-in door is a game changer
I'm in and out of the bed twenty times a day doing deliveries. The rear walk-in with fold-down steps means I'm not climbing over the tailgate every single stop, which has saved my knees. Only gripe is the steps can collect snow and get slippery—I added some grip tape and now it's perfect.
C
Carlos M.
Verified buyer
★★★★☆
“
Roof rack mounts lined up perfectly
Installed a Thule rack for extension ladders. The bolt holes in the cap roof matched the crossbar spacing exactly, so I didn't need adapters or custom brackets. Load capacity specs are conservative—I've had 300 pounds of lumber up there with no flex or creaking. Feels solid even on rough roads.
A
Angela P.
Verified buyer
★★★★★
“
Fleet manager's dream for maintenance
We spec these on all new truck orders now because downtime is our biggest cost. When a driver backs into a post or a tree branch catches the side, we order the damaged panel and our shop swaps it during the next oil change. No body shop, no week off the road. The cost per mile has dropped noticeably since we standardized on this cap across the fleet.
D
Derek S.
Verified buyer
★★★★★

Good to know

What buyers ask before ordering a commercial truck topper

Our standard eight-foot commercial truck cap weighs 260 pounds installed, compared to 400-450 pounds for a steel equivalent. That 140-190 pound difference translates directly to additional cargo capacity. For a typical half-ton truck rated at 1,800 pounds payload, the aluminum cap preserves an extra eight to ten percent of your legal hauling limit.

Weight varies slightly by configuration—walk-in rear doors add fifteen pounds over barn doors, and the high-rise model adds another twenty pounds for the extended sidewalls. We provide exact weights for each configuration in your quote so you can calculate real-world payload before ordering.

Yes. Every component—roof, side walls, doors, front bulkhead—is a modular bolt-in section. When damage occurs, you order the specific panel from our parts network, and most ship same-day from regional warehouses. Two-person installation with basic hand tools takes sixty to ninety minutes depending on which panel you're swapping.

We keep every module in stock for current and previous-generation models going back seven years. Cost for a side panel replacement runs about 30% of a new cap, and you avoid the multi-day wait and higher labor rates that come with traditional body-shop repair of a one-piece shell.

The roof is rated for 500 pounds static load and 350 pounds rolling load. Static means evenly distributed weight that isn't moving—tool boxes bolted to a rack, cargo boxes, kayaks strapped down. Rolling load accounts for impact stress when you're sliding ladders in and out, so we de-rate to 350 pounds to preserve long-term structural integrity.

The hat-channel ribs run longitudinally at sixteen-inch spacing, which matches standard truck-cap rack bolt patterns from Thule, Yakima, Weather Guard, and Adrian Steel. You won't need custom adapters or backing plates—the rack crossbars bolt directly into the reinforced channels.

Aluminum doesn't rust. The alloy we use—5052 marine grade—forms a protective oxide layer when exposed to air, which prevents further corrosion. That means no annual repainting, no flaking clear coat, and no rust bloom at fastener holes even in coastal or road-salt environments.

The frame and skin are TIG-welded, so there are no dissimilar-metal junctions where galvanic corrosion can start. All hardware is stainless steel, and the weather seals are EPDM rubber, which resists UV breakdown and ozone cracking better than the vinyl seals used on economy caps. We've seen these caps run ten-plus years in coastal fleets without structural degradation.

The LED harness is pre-wired and already mounted inside the cap when it ships. You connect two ring terminals to your truck battery—positive and negative—then mount the rocker switch in a blank dash slot or center console opening. No splicing into factory wiring, no relays to source separately. Total time is fifteen to twenty minutes if you've done basic automotive electrical work before.

The system draws 0.02 amps on standby with the motion-sensor upgrade, so parasitic drain won't kill your battery even if the truck sits unused for weeks. The four LED pucks are sealed units rated IP67, meaning they're dust-proof and can handle pressure-washing if you hose out the bed.

Most delivery and service fleets choose the full walk-in rear door with fold-down steps. It lets you step into the bed from ground level instead of climbing over the tailgate twenty times a day, which reduces fatigue and speeds up stop times. The steps lock into place and support 300 pounds, and the door seals just as tight as barn-door configs.

If you're loading wide cargo like plywood, glass panels, or pipe, dual rear barn doors give you a 68-inch clear opening compared to the walk-in door's 48-inch width. For low-clearance situations—parking garages, car washes—the flush canopy rear keeps the overall height minimal because the door sits level with the roofline instead of adding a raised hatch.

Yes. Fleet orders of five or more caps qualify for volume pricing and priority scheduling. We'll assign a dedicated account manager who coordinates delivery timing so all your trucks get outfitted in sequence, minimizing downtime. We also offer fleet-specific options like pre-applied vinyl graphics, keyed-alike lock cylinders across all units, and on-site installation at your facility if your fleet is within our service regions.

For national fleets, we can ship caps to your preferred installers or our authorized dealer network in each region. Lead time for fleet orders is typically four to six weeks from deposit, though we keep some stock configs available for faster turnaround if your delivery schedule is tight.

The collection
Explore commercial & fleet truck cap options
Compare door styles, roof heights, and accessory packages
View all commercial capsBrowse All