





A.R.E. CX Classic Camper Shell | Official Product Page
The CX Classic represents decades of engineering refinement in truck bed protection. We built this model for drivers who need secure, weather-tight storage without sacrificing bed access or adding unnecessary weight. The one-piece fiberglass shell mounts flush to your truck bed, creating a sealed environment that keeps gear dry through rain, snow, and highway speeds.
Every CX Classic ships with our proprietary clamp system that distributes load evenly across the bed rail. You get full standing height at the cab end, a curved rear door with dual compression latches, and side windows that tilt out for ventilation. This shell fits full-size pickups with 6.5' and 8' beds, and we color-match it to your truck's factory paint code at no additional charge.
CX Classic specifications

Fiberglass construction and finish quality
We mold every CX Classic from sheet molding compound — a fiberglass composite that cures in a single press cycle. This eliminates the seams and joints you’ll find in aluminum or multi-panel shells. The result is a shell that can’t separate at the corners, even after years of highway vibration and temperature swings.
Our paint shop applies a two-stage urethane system matched to your truck’s OEM color code. The base coat bonds directly to the gelcoat surface, and the clear coat adds UV protection that prevents fading. We’ve tested this finish through 500 hours of accelerated weathering, and it holds gloss better than most aftermarket spray-in liners. The same attention to material consistency that defines our entire camper shell lineup ensures every unit leaves the facility looking factory-installed.

Clamp system installation and bed protection
The CX Classic uses our Quick Release clamp system — eight clamps that grip the inner bed rail without drilling or bolting through metal. Each clamp has a rubber pad that sits between the shell frame and your truck’s paint, so you won’t see scratches or compression marks when you remove the shell for seasonal bed access.
Installation takes two people about 45 minutes. You position the shell on the bed, hand-tighten the clamps in sequence, then torque them to spec with the included wrench. The clamps distribute pressure across 18 inches of rail on each side, which keeps the shell stable even on rough roads. We designed this system for drivers who swap between shells and tonneau covers depending on the season — you can remove and reinstall the CX Classic without leaving permanent hardware on the truck.
Interior dimensions and cargo capacity
Full-height clearance at the cab end
The CX Classic gives you 28 inches of vertical clearance where the shell meets the cab. That’s enough room to stand toolboxes on end, stack coolers two-high, or slide in a dirt bike with the front wheel turned. The roofline slopes gradually toward the tailgate, dropping to 20 inches at the rear door threshold.
Usable floor space
A 6.5-foot bed version offers 42 cubic feet of enclosed storage. The 8-foot bed model increases that to 52 cubic feet. Both sizes maintain full bed width between the wheel wells, so you can lay plywood flat or slide in a standard pallet without angling it. The shell doesn’t intrude on bed stake pockets, so you can still use tie-down anchors for securing loose cargo.



Shop more A.R.E. camper shells and truck caps
Rated 4.8 by verified buyers




Common questions about the CX Classic
Yes, installation requires two people and basic hand tools. You'll position the shell on the bed, hand-tighten the eight clamps in sequence, then torque them with the included wrench. Most customers complete installation in 45 minutes.
The clamps grip the inner bed rail without drilling or bolting. Each clamp has a rubber pad that protects your truck's paint. We include a detailed instruction sheet with photos and torque specifications for each step.
We match your truck's OEM paint code at no additional charge. You'll provide your truck's color code at checkout — usually found on a sticker inside the driver's door jamb — and we'll apply that exact color in our paint booth.
Our two-stage urethane system bonds to the fiberglass gelcoat and cures with a UV-protective clear coat. The finish matches your truck's gloss level and texture. Most customers report that the shell looks factory-installed once mounted.
Yes, the shell is compatible with spray-in liners, drop-in liners, and bare metal beds. The clamp system adjusts to accommodate the added thickness of a liner without affecting fit or seal quality.
If you have an over-rail liner that extends above the bed rail, you may need spacer blocks under the clamps. We include those spacers at no charge when your truck requires them.
The CX Classic uses one-piece fiberglass construction and a curved rear door. It's designed for drivers who prioritize weather-tight storage and straightforward installation. Models like the CX Evolve add upgraded side windows and roof rack systems. The MX Series offers reinforced framing for commercial use.
All our shells use the same clamp mounting system and paint-matching process. The CX Classic balances features and cost for most full-size truck owners who need daily bed protection.
Yes, the Quick Release clamp system allows seasonal removal and reinstallation. The rubber clamp pads protect your bed rails from scratches and compression marks. You can take the shell off in under 30 minutes with a second person helping.
Many customers remove their shells in summer for open-bed hauling and reinstall them before winter. The clamps maintain proper tension through multiple install cycles without loosening or damaging the truck's paint.
Most drivers report a 1-2 MPG improvement over driving with an open bed. The shell smooths airflow over the bed, reducing drag at highway speeds. Actual mileage change depends on your truck's engine, typical speed, and load weight.
The fiberglass shell weighs approximately 180 pounds for a 6.5-foot bed model and 220 pounds for an 8-foot bed. This added weight is offset by the aerodynamic benefit during highway driving.
The CX Classic carries a three-year structural warranty covering the fiberglass shell, mounting frame, hinges, and compression latches. The warranty covers defects in materials and workmanship under normal use conditions.
We also cover the paint finish for three years against fading, peeling, or delamination. If you experience any covered issues, we'll repair or replace the affected components at no charge. Installation labor is not included in the warranty.
