LEER Roof Rack System product image
LEER Roof Rack System product image
LEER Roof Rack System product image
LEER Roof Rack System product image
LEER Roof Rack System product image
LEER Roof Rack System product image
LEER Roof Rack System product image

LEER Roof Rack | Professional-Grade Truck Cap Roof Systems

★★★★★4.8· thousands of reviews

Our LEER roof rack system mounts directly to your truck cap, adding professional-grade cargo capacity without compromising aerodynamics or fuel efficiency. Engineered from aircraft-grade aluminum with a powder-coated finish, this rack system handles everything from kayaks and lumber to rooftop tents and work equipment.

The T-slot rail design accepts most aftermarket crossbars and accessories, giving you complete flexibility to configure your setup for any job or adventure. We built this system for contractors, outdoor enthusiasts, and anyone who needs their truck to work harder.

Configure Your RackExplore the Collection
01
500 lb dynamic load capacity (200 lb static)
02
Aircraft-grade aluminum construction with corrosion-resistant powder coat
03
Universal T-slot compatibility for aftermarket crossbars
04
Low-profile design maintains fuel economy and clearance
At a glance

Key specifications & load capacity

500 lb dynamic load capacity (200 lb static)
Aircraft-grade aluminum construction with corros
Universal T-slot compatibility for aftermarket c
Low-profile design maintains fuel economy and cl
Tool-free installation on all LEER cap models
Includes integrated tie-down points and mounting
Load Capacity & Weight Distribution
Product details

Load Capacity & Weight Distribution

The LEER roof rack carries a 500 lb dynamic load rating when properly distributed across the full rail system. That translates to two full-size kayaks, a rooftop tent with two adults, or stacked lumber up to twelve feet. Static load capacity increases to 200 lb when the vehicle is parked, making overnight rooftop camping fully supported.

Weight must be distributed evenly across both rails. We engineered the mounting brackets to transfer load directly into your cap’s aluminum frame, bypassing the fiberglass shell entirely. Each bracket location is reinforced at the factory during cap assembly, so retrofit installation maintains the same structural integrity as factory-equipped units.

Installation & Cap Compatibility
Sizing & fit

Installation & Cap Compatibility

Every LEER truck cap ships with pre-drilled mounting points for our roof rack system. Installation takes fifteen minutes with zero drilling or permanent modification to your cap. The clamp-style brackets slide into factory channels and tighten with thumb screws, allowing you to remove the entire rack for seasonal storage without leaving visible holes.

The system fits all LEER 100-Series caps manufactured after 2015, plus most 180-Series and DCC models. Older caps may require adapter brackets, which we stock for common bed lengths. If you’re adding a rack to an existing LEER cap, contact our installation team to verify bracket compatibility for your specific model year.

Styling

Crossbar Options & Accessory Integration

T-Slot Rail System

Our T-slot rail design accepts Thule, Yakima, and Rhino-Rack crossbars without adapters. The 30mm slot spacing matches industry-standard mounting patterns, so you can swap crossbars between vehicles or upgrade to specialized carriers as your needs change. We’ve tested compatibility with over forty aftermarket roof accessories, from bike trays to cargo boxes.

Integrated Tie-Down Points

Eight integrated D-rings run the length of both rails, spaced every sixteen inches. These flush-mount anchors accept standard ratchet straps and cam buckles for securing loose cargo like kayaks, lumber, or camping gear. The D-rings rotate 360 degrees and lock in place with a quarter-turn, preventing strap twist during highway driving.

Crossbar Options & Accessory Integration
Crossbar Options & Accessory Integration
Crossbar Options & Accessory Integration

Complete the look

Complete Your LEER Setup


Customer reviews

Rated 4.8 by verified buyers

4.8
★★★★★
Based on verified reviews
Read on Amazon →
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
“
Handles my rooftop tent perfectly
I was skeptical about putting a rooftop tent on a truck cap, but this rack system is bomber. We've slept in it for three weeks straight across Utah and Colorado with zero creaking or flex. Installation took twenty minutes and I didn't drill a single hole.
M
Marcus T.
Verified buyer
★★★★★
“
Finally a rack that doesn't whistle
Previous roof racks on my old cap whistled like a jet engine above 55 mph. This LEER system is silent. The low profile actually improved my fuel economy compared to running crossbars directly on the cab roof.
J
Jennifer K.
Verified buyer
★★★★★
“
Contractor-grade durability
I haul twelve-foot aluminum extension ladders daily. This rack takes the abuse without bending or loosening. The powder coat still looks new after two years of job site grime and power washing.
D
David M.
Verified buyer
★★★★★
“
Tool-free install is no joke
I've installed plenty of aftermarket racks that claim tool-free mounting. This is the first one that actually delivered. Thumb screws are thick metal, not cheap plastic, and they stay tight.
R
Rachel P.
Verified buyer
★★★★★
“
Perfect for kayak season
We run two fourteen-foot kayaks up top every weekend. The tie-down points are spaced perfectly and the T-slots accepted our Yakima J-cradles without any adapters. Rock solid at highway speeds.
B
Brian L.
Verified buyer
★★★★★
“
Should have bought this years ago
I wasted money on two cheap racks before investing in this LEER system. The difference in build quality is night and day. This rack will outlast my truck.
A
Amanda G.
Verified buyer
★★★★★

Good to know

Common Questions About LEER Roof Racks

The LEER roof rack system is engineered specifically for LEER truck caps with factory mounting channels. It will not fit caps from other manufacturers without significant modification. If you own a non-LEER cap, contact our team to discuss universal rack alternatives that mount to your specific cap's roof profile.

Installation is fully DIY with zero tools required. The clamp-style brackets slide into pre-drilled channels on your LEER cap and tighten with oversized thumb screws. Most owners complete installation in under twenty minutes. We include step-by-step instructions with photos, and installation videos are available on our support page.

The system is rated for 500 lb dynamic load when the vehicle is in motion, distributed evenly across both rails. Static load capacity increases to 200 lb when parked, which safely supports rooftop tents with two adult occupants. Always verify your truck's gross vehicle weight rating and roof load limit before adding cargo.

Installing the LEER roof rack does not void your cap warranty. The rack mounts to factory-reinforced points and does not penetrate the fiberglass shell. We recommend professional installation for fleet or commercial applications to maintain documentation, but DIY installation using factory hardware preserves all warranty coverage.

Yes. The clamp brackets release with thumb screws and the entire rack lifts off in one piece. Removal takes about ten minutes and leaves no visible hardware on your cap. Many owners remove their racks seasonally to maximize fuel economy during winter months when rooftop cargo isn't needed.

The low-profile design minimizes aerodynamic drag compared to traditional raised crossbars. Independent testing showed a 1-2% fuel economy reduction with the rack installed empty, versus 4-6% for cab-mounted crossbars. Actual impact varies with vehicle speed, crossbar selection, and cargo shape.

The 30mm T-slot rail accepts Thule, Yakima, Rhino-Rack, and most aftermarket crossbars without adapters. We've verified compatibility with over forty rack systems. If you already own crossbars, check the manufacturer specifications for T-slot or channel-mount compatibility. Our team can confirm fitment for specific crossbar models.

The collection
Build Your Complete LEER Truck Cap System
Pair your roof rack with caps, tonneau covers, and work accessories
Explore All AccessoriesBrowse All