ARE MX Series GMC Sierra Camper Shell product image
ARE MX Series GMC Sierra Camper Shell product image
ARE MX Series GMC Sierra Camper Shell product image
ARE MX Series GMC Sierra Camper Shell product image
ARE MX Series GMC Sierra Camper Shell product image
ARE MX Series GMC Sierra Camper Shell product image
ARE MX Series GMC Sierra Camper Shell product image

GMC Sierra Camper Shell – Durable Truck Bed Cover | ARE

★★★★★4.8· thousands of reviews

Our MX Series camper shell transforms your GMC Sierra bed into secure, walk-in storage without sacrificing payload capacity. Built from vacuum-bonded fiberglass composite panels, this shell provides full standing height for 6.5-foot and 8-foot Sierra beds while matching OEM paint finishes and body lines down to the millimeter.

We engineered every seal, hinge, and mounting bracket to handle Sierra-specific bed dimensions across 2014–2025 model years, including the MultiPro tailgate configuration on 2019+ trucks. Whether you're securing tools on a worksite or hauling gear into backcountry campsites, this shell delivers weather-tight protection and theft deterrence that soft tonneau covers can't match.

Request Sierra QuoteExplore the Collection
01
Vacuum-bonded fiberglass construction with multi-layer gelcoat finish
02
Full standing height for 6.5' and 8' Sierra bed lengths
03
Tinted sliding side windows with locking latches and screens
04
Rear barn door configuration with stainless steel rotary latches
At a glance

What makes this shell different

Vacuum-bonded fiberglass construction with multi
Full standing height for 6.5' and 8' Sierra bed
Tinted sliding side windows with locking latches
Rear barn door configuration with stainless stee
Integrated third brake light wiring harness (201
Custom-matched OEM Sierra paint colors available
Construction and materials
Product details

Construction and materials

We build every GMC Sierra camper shell from hand-laid fiberglass composite panels that cure in vacuum-bonded molds for uniform wall thickness and structural consistency. The outer gelcoat receives a multi-stage UV-resistant finish matched to GM’s factory paint codes, so the shell integrates seamlessly with your Sierra’s cab and fender lines.

Internal aluminum ribbing runs along the roof perimeter and sidewalls, distributing load stress across the shell rather than concentrating it at mounting points. This reinforcement matters when you’re navigating washboard Forest Service roads or stacking heavy cargo against the sidewalls — the frame stays rigid and the gelcoat won’t spiderweb from flexing.

Fit for 2014–2025 Sierra models
Sizing & fit

Fit for 2014–2025 Sierra models

Bed length compatibility

Our MX Series shell mounts to both 6.5-foot short bed and 8-foot long bed Sierra configurations without adapter kits or custom fabrication. The base rail system clamps directly to the Sierra’s factory bed rail channels using stainless steel C-clamps, eliminating the need for through-bed drilling that compromises resale value or warranty coverage.

MultiPro tailgate integration

For 2019 and newer Sierra models equipped with GM’s six-position MultiPro tailgate, we include an extended rear door frame that clears the inner gate panel when it’s folded into load-stop or step configurations. The shell’s barn doors still seal fully when the MultiPro is closed, and you retain access to the tailgate’s inner storage compartment.

Styling

Window and door options

Standard side windows use factory-tinted tempered glass mounted in aluminum slider frames with integrated insect screens. Each window locks independently from the interior using rotary paddle latches — no keys required when you’re already inside the bed. The rear barn door configuration splits down the centerline with marine-grade weather stripping along all four edges and a three-point stainless rotary latch system that applies even clamping pressure across the door perimeter.

We position the third brake light housing directly above the rear doors, wired into your Sierra’s factory brake circuit through a plug-and-play harness that taps the bed-mounted light connector on 2014+ models. No splicing, no aftermarket relays — the light activates whenever you touch the brake pedal and passes DOT photometric requirements for center high-mounted stop lamps.

Window and door options
Window and door options
Window and door options

Complete the look

More cap styles for full-size pickups


Customer reviews

Rated 4.8 by verified buyers

4.8
★★★★★
Based on verified reviews
Read on Amazon →
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
“
Perfect fit on my 2021 Sierra AT4
I measured three times before ordering because I was worried about the MultiPro tailgate clearance, but the barn doors line up perfectly and I can still use every tailgate position. The paint match on my Carbonblack Metallic is spot-on — you can't tell where the cab ends and the shell begins.
M
Marcus T.
Verified buyer
★★★★★
“
No leaks after six months of Pacific Northwest rain
We get 60+ inches of rain a year here, and I've had zero water intrusion around the side windows or rear doors. The rubber seals do their job. I keep expensive camera gear back there and it stays bone-dry even during week-long coastal storms.
E
Elena K.
Verified buyer
★★★★★
“
Standing height makes all the difference
I'm 5'10" and I can stand upright in the 8-foot bed version without hunching over. That matters when you're digging through storage bins or changing clothes after a surf session. My old low-profile tonneau cover looked cleaner, but this shell is infinitely more practical.
R
Ryan B.
Verified buyer
★★★★★
“
Solid build, takes two people to install
The fiberglass feels thick and the barn door latches are heavy-duty stainless, not cheap pot metal. Installation went smooth with my brother helping — we had it mounted and leveled in about two hours. Only downside is weight; this thing is not coming off solo if you need to haul plywood.
J
Jose M.
Verified buyer
★★★★☆
“
Finally a cap that doesn't rattle
I've owned three different caps over the years and they all developed rattles within a few months. This ARE shell stays quiet on rough dirt roads because the clamp system actually holds it tight to the bed rails. No shims needed, no foam tape fixes — it just works.
L
Linda R.
Verified buyer
★★★★★
“
Great for overlanding and truck camping
We run this shell on our 2022 Sierra 1500 and it's become our base camp on weekend trips. The side windows provide cross-ventilation when we're sleeping in the bed, and the full standing height means we can sit upright on our sleeping platform without bonking our heads. The integrated brake light is a nice safety touch too.
D
Derek P.
Verified buyer
★★★★★

Good to know

GMC Sierra camper shell questions

Yes, our MX Series shell mounts to all 2019–2025 Sierra models including trucks with GM's carbon fiber composite CarbonPro bed. The mounting clamps attach to the bed rail channels rather than the bed floor or sidewalls, so the bed material doesn't affect fitment. You'll use the same installation procedure and hardware whether your truck has a steel bed or the CarbonPro upgrade.

Absolutely. The shell's barn doors mount independently of your Sierra's tailgate mechanism, so factory power tailgate operation remains fully functional on Sierra Denali and AT4 models equipped with that option. The doors seal against the shell frame rather than the tailgate itself, which means you can open and close the powered tailgate without touching the shell doors.

The complete MX Series shell weighs approximately 180 pounds for the 6.5-foot bed version and 210 pounds for the 8-foot bed. That weight reduces your Sierra's available payload by the same amount — a 2024 Sierra 1500 with a 2,240-pound payload rating would have 2,060 pounds remaining after shell installation. The weight is distributed across eight mounting points, so you won't see any bed sag or suspension compression from the shell alone.

Our gelcoat finish arrives color-matched to GM factory paint codes, but you can have a body shop apply custom paint or a vinyl wrap over the existing gelcoat if you want a unique finish. The fiberglass surface accepts automotive paint primers without special etching or adhesion promoters, though we recommend light sanding with 320-grit to create mechanical tooth for the primer layer.

The sliding side windows create cross-ventilation when both are open, and the integrated insect screens let you keep them open overnight without mosquitoes or flies getting inside. For serious truck camping, many customers add a roof vent or small battery-powered fan, but the side windows alone provide adequate airflow for weekend trips in moderate climates. Just crack both windows about six inches and you'll get a steady breeze through the bed.

Yes, the MX Series roof includes internal aluminum reinforcement ribs that support aftermarket roof rack systems. We offer a proprietary rack system designed specifically for this shell, or you can use universal truck cap racks from companies like Thule and Yakima. Maximum recommended roof load is 200 pounds static and 150 pounds dynamic — enough for kayaks, paddleboards, or a roof-top tent on short trips.

We back the fiberglass shell structure with a lifetime warranty against delamination, cracking, or bond failure as long as you own the truck. Hardware components including latches, hinges, window frames, and mounting clamps carry a one-year warranty from the installation date. Paint finish and gelcoat are warranted for three years against fading, chalking, or peeling when the shell is maintained according to our care guidelines.

The collection
Find the right cap for your truck
Browse commercial, sport, and ranch cap styles for every full-size pickup.
View All CapsBrowse All